What's your typical turnaround time for estimates?

Most projects are completed within 24-48 hours depending on scope and complexity. We prioritize accuracy over speed but understand deadline pressures contractors face daily. Rush projects can be accommodated with advance notice.

Do you provide estimates for all construction trades?

Yes. Our team at EZ Estimation handles everything from sitework and structural trades to MEP systems and specialty work. We're a full-service cost estimation company covering residential, commercial, industrial, and specialized projects.

What if I don't have project plans?

No problem. You can share your project details and specifications with us. Our estimators will use that information, along with past project data and industry standards, to create a preliminary estimate for you.

What information do you need to start an estimate?

Send us your project plans in PDF format via email, Dropbox, or Google Drive. Include specifications, material lists, timeline requirements, and any special requirements for the most accurate results. Contact info@ezestimation.com or call +1-214-380-3255.

Can you handle rush projects?

We avoid compromising quality for speed, but we accommodate tight deadlines when possible. Contact us directly to discuss your project timeline and requirements. Many rush projects can be completed within 12-24 hours.

What areas do you serve?

EZ Estimation serves contractors and builders nationwide across the United States. We have offices in Plano, Texas and Eaton, Ohio, and provide zip code-based pricing for accurate regional cost estimates.

Do you use Xactimate software?

Yes, we provide Xactimate estimates for insurance claims, disaster recovery, and restoration projects. Our certified estimators are experienced in all Xactimate modules and formats required by your insurance carriers.

Are your estimators certified?

Yes, our team consists of certified construction estimators trained in ASPE (American Society of Professional Estimators) standards. Our estimators maintain current credentials and stay updated on industry best practices and pricing databases.

MEP - Mechanical, Electrical, Plumbing Estimating Services

Complete MEP estimates for plumbing, mechanical, and electrical systems. We deliver detailed MEP estimation within 24-48 hours covering all building systems with accurate material takeoffs and labor costs helping MEP contractors bid projects profitably nationwide.

Services Overview

Complete Building Systems Estimates for MEP Contractors

MEP systems represent major project costs and require specialized estimating knowledge. Plumbing, mechanical, and electrical work each demand different approaches. We quantify fixtures, piping, equipment, ductwork, panels, conduit, and all system components. Coordination between trades affects costs significantly. Our estimates account for these interactions to help MEP contractors bid accurately and maintain healthy margins.

Building systems grow more complex every year. Energy codes, smart building technology, and integrated controls change how systems get designed and installed. We stay current with these developments. We aim to serve MEP contractors across the United States with expertise in California markets including Los Angeles, San Diego, San Jose, San Francisco, Fresno and Texas including Houston, San Antonio, Dallas, Austin and Fort Worth.

Our Services

Where Innovation Meets
Complex Problem-Solving

Plumbing Estimation

Water supply, drainage, fixtures, gas piping, and all plumbing system components with labor costs.

Mechanical (HVAC) Estimation

Heating, cooling equipment, ductwork, refrigerant lines, controls, and complete HVAC system installations estimated.

Electrical Estimation

Service panels, distribution, conduit, wire, devices, fixtures, and complete electrical systems quantified accurately.

Complete MEP Estimation

Fully coordinated mechanical, electrical, and plumbing estimates with all systems integrated for seamless execution.

Why Choose Us

MEP Expertise for Accurate Building Systems Estimates

MEP estimating requires understanding complex building systems and trade coordination. Wrong equipment sizes, missed components, or unrealistic labor hours create budget problems. Our experienced MEP estimators prevent these costly mistakes.

Our Estimating Process

How We Build Every MEP Cost Estimate

Our MEP estimating services turn plumbing, mechanical, and electrical drawings into a coordinated, bid-ready cost estimate — delivered in 24-48 hours, with a free MEP estimate quote online before work begins.

Send your MEP drawings & specs

Upload plumbing, mechanical, and electrical plans, including design-build MEP scopes. No complete specs yet? We can still scope a preliminary estimate.

We run trade coordination & equipment review

Our estimators verify equipment sizing and check for clashes between plumbing, mechanical, and electrical systems before pricing begins.

Receive your estimate in 24-48 hours

A complete MEP cost estimate covering material takeoffs, labor, and code compliance — ready to bid with confidence.

Scope of Estimate

What's Included in Every MEP Cost Estimate

Our mechanical, electrical, and plumbing cost estimation services go system-by-system, so equipment sizing, trade coordination, and code compliance are covered before your bid goes out.

Plumbing system takeoffs

Water supply, drainage, fixtures, and gas piping quantified with complete labor cost estimating.

Mechanical (HVAC) estimating

Heating and cooling equipment, ductwork, refrigerant lines, and controls estimated for complete installs.

Electrical system estimating

Service panels, distribution, conduit, wire, devices, and fixtures quantified accurately.

Equipment sizing verification

Every equipment specification checked against project requirements before it's priced into your estimate.

MEP trade coordination

Plumbing, mechanical, and electrical scopes checked against each other to prevent clashes and missed items.

Code compliance & energy codes

Current energy codes and smart building requirements factored into every mechanical and electrical estimate.

Where We Work

MEP Cost Estimating Coverage Nationwide

24-48h

Estimate turnaround

1

Point of contact, all systems

4

Systems coordinated together

40+

States served nationwide

Our MEP cost estimating services support contractors bidding plumbing, mechanical, and electrical work nationwide, with concentrated expertise across California and Texas markets where energy codes and labor rates shift the numbers most.

As building systems get more complex, we stay current on smart building technology and integrated controls, so every MEP estimate reflects how projects are actually designed and installed today.

CA + TX

Concentrated MEP estimating expertise, backed by nationwide coverage across plumbing, mechanical, and electrical trades.

Turnaround

Trades covered

States served

24-48 hrs

3 MEP systems

40+ nationwide

Connect With Our Estimators

Do you have any questions about our construction cost estimation services? Our team is available 24/7 to discuss your project needs, timeline requirements, and how we can help you bid more competitively across Texas, NYC, and nationwide.

Address 1

6121 W Park Blvd, suite c-202, Plano, TX 75093

Address 2

219 Wayne Ave, Eaton, OH 45320

Phone

+1(214)-380-3255
+1(972)-391-7588
+1(937) 533-4737

info@ezestimation.com

Get Your Free Quote Today

Submit your project plans and receive a detailed quote within one hour. Our team reviews your drawings, confirms scope, and provides transparent pricing with delivery timelines. Start winning more bids with accurate cost estimates.

FAQs

Most Popular Questions

MEP estimating services help contractors bid plumbing, mechanical, and electrical projects with accurate system takeoffs and labor calculations nationwide.

What's included in MEP estimates?

All plumbing fixtures and piping, HVAC equipment and ductwork, electrical panels and distribution, controls, specialties, and installation labor for complete building systems.

Do you estimate each trade separately?

Yes. We provide separate estimates for plumbing, mechanical, and electrical trades or complete coordinated MEP packages based on your needs.

How do you handle equipment specifications?

We follow specifications exactly and include appropriate alternates when specified. Equipment lead times and special requirements get noted clearly.

Can you estimate design-build MEP projects?

Yes. We work with preliminary designs and performance specifications to develop budgets for design-build MEP work with stated assumptions.

How quickly can you deliver MEP estimates?

Most MEP estimates are completed within 24-48 hours depending on system complexity with rush service available for urgent deadlines.

Do you coordinate between MEP trades?

Yes. Complete MEP estimates identify coordination requirements, potential conflicts, and interface points between plumbing, mechanical, and electrical systems.

Turnaround Time 24-48 Hours!

MEP - Mechanical, Electrical, Plumbing Estimating Services

Complete Building Systems Estimates for MEP Contractors